SMC Networks SMC2804WBR V.2 Configuring the Wireless Barricade G Router, Browser Configuration

CONFIGURING THE WIRELESS BARRICADE™ G ROUTER

The Wireless Barricade™ g Router can be configured by Internet Explorer 5.0 or above. Using the web management interface, you can configure the Wireless Barricade™ and view statistics to monitor network activity.

Note: Before you attempt to configure your router, if you have access to the Internet please visit www.smc.com or www.smc-europe.com and download the latest firmware update to ensure your Wireless Barricade™ is running the latest firmware.

Before you attempt to log into the web-based Administration, please verify the following.

1.Your browser is configured properly (see below).

2.Disable any firewall or security software that may be running.

3.Confirm that you have a good link LED where your computer is plugged into the Wireless Barricade™. If you don’t have

a link light, then try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the Internet using the Ethernet cable that is installed in the computer. This is configured through the options/preference section of your browser.

29