SMC Networks SMC2804WBR V.2 manual Hardware Description, Front and Rear Panels

Hardware Description

•One RJ-45 port for connection to a DSL or cable modem (WAN). This port also auto-negotiates operating speed

to 10/100 Mbps, the mode to half/full duplex, and the pin signals to MDI/MDI-X.

The following figure shows the components of the Wireless Barricade™:

Figure 1. Front and Rear Panels

Item	Description
LEDs	Power, WLAN, WAN and LAN port status indicators.
	(See "LED Indicators" on page 2.)
Reset	Use this button to reset the power and restore the default factory
Button	settings.
Power	Connect the included power adapter to this inlet.
Inlet	Warning: Using the wrong type of power adapter may damage
	your router.
WAN	WAN port (RJ-45). Connect your cable modem, DSL modem,
Port	or an Ethernet router to this port.
LAN	Fast Ethernet ports (RJ-45). Connect devices (such as a PC,
Ports	hub or switch) on your local area network to these ports.

7