SMC Networks SMC2804WBR V.2 manual Point-to-Point Over Ethernet PPPoE

Advanced Setup

Point-to-Point Over Ethernet (PPPoE)

Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some service providers.

The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1454) unless you have a particular reason to change it.

Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 10 minutes).

Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again.

Note: Please be aware that the setting of [Maximum Idle Time] to "0" and/or [Auto-Reconnect] enabled can cause an increase of your telephone bill if you don't have signed a flatrate.

49