Installing the Wireless Barricade™ g Router
Attach to Your Network Using Ethernet Cabling
The four LAN ports on the Wireless Barricade™ auto-negotiate the connection speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet, and the transmission mode to half duplex or full duplex.
Use twisted-pair cable to connect any of the four LAN ports on the Wireless Barricade™ to an Ethernet adapter on your PC. Otherwise, you can cascade any of the LAN ports on the Wireless Barricade™ to an Ethernet hub or switch, and then connect your PC or other network equipment to the hub or switch. When inserting an RJ-45 plug, be sure the tab on
the plug clicks into position to ensure that it is properly seated.
Warning: Do not plug a phone jack connector into any RJ-45 port. This may damage the Wireless Barricade™. Instead, use only twisted-pair cables with RJ-45 connectors that conform with FCC standards.
Figure 3. Making the LAN Connections