SMC Networks SMC2804WBR V.2 manual Point-to-Point Tunneling Protocol Pptp

Configuring the Wireless Barricade™ g Router

Point-to-Point Tunneling Protocol (PPTP)

Point-to-Point Tunneling Protocol (PPTP) can be used to join different physical networks using the Internet as an intermediary. Using the above screen allows client PCs to establish a normal PPTP session and provides hassle-free configuration of the PPTP client on each client PC.

Enter the PPTP Account, Password, Host Name, and then Service IP Address (usually supplied by your ISP), the assigned IP address, and subnet mask.

Leave the Maximum Transmission Unit (MTU) at the default value (1460) unless you have a particular reason to change it.

Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the PPTP connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 0 minutes.)

Note: Please be aware that the setting of [Maximum Idle Time] to "0" and/or [Auto-Reconnect] enabled can cause an increase of your telephone bill if you don't have signed a flatrate.

50