C
OMPLIANCES
viSafety Compliance

Warning: Fiber Optic Port Safety

Avertissment: Ports pour fibres optiques - sécurité sur le plan

optique

Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit

Underwriters Laboratories Compliance Statement

Important!
Before making connections, make sure you have the correct cord set. Check it (read
the label on the cable) against the following:

The unit automatically matches the connected input voltage. T herefore, no additional adjustments
are necessary when connecting it to any input voltage wit hin the range marked on the rear panel.
When using a fiber optic port, never look at the transmit laser whi le it is
powered on. Also, never look directly at the fiber TX port and fiber
cable ends when they are powered on.
Ne regardez jamais le laser tant qu’il est sous tension. Ne regardez
jamais directement le port TX (Transmission) à fibres optiques et les
embouts de câbles à fibres optiques tant qu’ils sont sous tension.
Niemals ein Übertragungslaser betrachten, während dieses einge schaltet
ist. Niemals direkt auf den Fas er-TX-Anschluß und auf die
Faserkabelenden schauen, während diese eingeschaltet sind.
Operating Voltage Cord Set Specifications
120 Volts UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug rated
15 A, 125 V
240 Volts (Europe only) Cord Set with H05VV-F cord having three
conductors with minimum diameter of 0.75 mm2
IEC-320 receptacle
Male plug rated 10 A, 250 V
CLASSI
LASERDEVICE
DISPOSITIFLASER
DECLASSE I
LASERGER
DERKLASSE I
ÄT