INSTALLING A GBIC TRANSCEIVER

Installing a GBIC Transceiver

Figure 3-5. Installing a GBIC Transceiver

You can install a GBIC transceiver as described below:

1.Insert the transceiver with the SC connector facing out toward you. Note that the transceiver is keyed so that it can only be installed in one orientation.

2.Press in on the transceiver’s side tabs, and gently slide it into the GBIC interface slot until it clicks into place.

Caution: GBIC transceivers are hot-swappable. You do not need to power off the switch before installing or removing a transceiver.

Note: Install only 5 V GBIC transceivers into the module slots.

3-7

Page 45
Image 45
SMC Networks SMC6724L3 INT manual Installing a Gbic Transceiver