SMC Networks SMCWBR11S-N manual Wizard WAN Settings L2TP

CHAPTER 4 Initial Configuration

Setup Wizard

STEP 3 - WAN

SETTINGS - L2TP

Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual private networks. The service is provided in many European countries.

Figure 21: Wizard Step 3 - WAN Settings - L2TP

The following items are displayed on this page:

◆Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)

◆User Name — Sets the L2TP user name for the WAN port. (Default: l2tp_user; Range: 1~32 characters)

◆Password — Sets a L2TP password for the WAN port. (Default: l2tp_password; Range: 1~32 characters)

◆Verify Password — Prompts you to re-enter your chosen password.

◆Address Mode — Sets a L2TP network mode. (Default: Static)

◆IP Address — Sets the static IP address. (Default: 0.0.0.0, available when L2TP Network Mode is set to static IP.)

◆Subnet Mask — Sets the static IP subnet mask. (Default: 255.255.255.0, available when L2TP Network Mode is set to static IP.)

– 43 –