SMC Networks SMCWBR11S-N manual PPPoE Configuration

CHAPTER 6 Network Settings

WAN Setting

PC's MAC address provided to your ISP for registration. You can enter the registered MAC address manually by typing it in the boxes provided. Otherwise, connect only the PC with the registered MAC address to the Mini Broadband Router, then click the “Clone your PC’s MAC Address” (Default: Disable)

PPPOE Enables the Mini Broadband Router IP address to be assigned automatically from an Internet service provider (ISP) through a DSL modem using Point- to-Point Protocol over Ethernet (PPPoE).

Figure 28: PPPoE Configuration

The following items are displayed on this page:

◆PPPoE User Name — Sets the PPPoE user name for the WAN port. (Default: pppoe_user; Range: 1~32 characters)

◆PPPoE Password — Sets a PPPoE password for the WAN port. (Default: pppoe_password; Range: 1~32 characters)

◆Verify Password — Prompts you to re-enter your chosen password.

◆Operation Mode — Selects the operation mode as Keep Alive, On Demand or Manual. (Default: Keep Alive)

■Keep Alive Mode: The Mini Broadband Router will periodically check your Internet connection and automatically re-establish your connection when disconnected. (Default: 60 seconds)

– 54 –