SMC Networks SMCWBR11S-N manual Network Settings, Wan Setting

6

NETWORK SETTINGS

The Network Settings pages allow you to manage basic system configuration settings. It includes the following sections:

◆“WAN Setting” on page 51

■“DHCP” on page 52

■“Static IP” on page 53

■“PPPoE” on page 54

■“PPTP” on page 55

■“L2TP” on page 57

◆“LAN Setting” on page 59

◆“DHCP Clients” on page 61

◆“Advanced Routing” on page 62

NOTE: In Bridge mode, the Mini Broadband Router’s Network Settings options are significantly reduced, with only LAN Settings and the Client List being available to the user.

WAN SETTING

The WAN Setting page specifies the Internet connection parameters. Click on “Network Settings” followed by “WAN”.

◆WAN Connection Type — By default, the access point WAN port is configured with DHCP enabled. After you have network access to the access point, you can use the web browser interface to modify the initial IP configuration, if needed. The options are Static IP, DHCP (cable modem), PPPoE (DSL modem), PPTP, and L2TP. Each option changes the parameters displayed below it. (Default: DHCP).

– 51 –