SMC Networks SMCWIPCAM-G manual Network Cable Connector

When factory reset is completed, the configuration of camera will return to the defaults as:

-IP address: 192.168.1.2

-Administrator’s login name: admin

-Password: admin

-Wireless status (for wireless model): disabled

3. Network Cable Connector

The camera’s rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports the N-Way protocol and “AutoMDIX” function, allowing the camera to automatically detect or negotiate the transmission speed of the network.

4.Antenna (for wireless model)

The rotatable external antenna allows you to adjust its position to obtain the maximum signal.

11