SMC Networks SMCWIPCAM-G manual

are two choices: Infrastructure mode and Ad-Hocmode.

-SSID: SSID (Service Set Identity) is the name assigned to the wireless network. It will auto-detect and display the SSID of wireless network connected in this box. This default setting will let the camera connect to ANY access point under the infrastructure network mode.

-Channel: This pull-down menu provides the wireless channel for communication. A “channel” is a range of frequencies to be used in communication between the camera and access point in Infrastructure mode, or the camera and PC/Notebook in Ad-Hoc mode. Select the appropriate channel from the list provided depending on the regulatory region where the unit is sold.

-Security Mode: Wireless network communications can be intercepted easily. This option will help you protect your wireless network.

-Authentication: Open communicates the key across the network. Shared allows communication only with other devices with identical WEP settings.

-Encryption Mode: This option allows you to configure the setting of data encryption. The WEP key must be set before the data encryption is enforced.

-Key Format: To enable WEP Encryption, you should decide the encryption format first by selecting the ASCII or HEX option, and then input the WEP key (in the following Key 1~4 box).

-Pre-Shared Key: This is used to identify each other in the network. Enter the name in the Pre-Shared Key box, and this name must match the Pre-Shared Key value in the remote device.

38