SocketScan Auto-Reconnect
If your mobile device suspends or the CHS moves out of range,
the connection will end. After the mobile device turns on again
or returns in range, SocketScan will try to re-connect for
approximately three minutes.
If, after 3 minutes, they have not re-connected, you will need to
manually re-connect them by tapping on the SocketScan icon
and tapping Connect CS.
To disconnect, tap on the SocketScan icon at the bottom of the
Today screen and tap Disconnect. Your mobile device will
disconnect from the CHS, and Connect!Agent will turn off the
Bluetooth radio of your mobile device.
Turning off the CHS
To turn off the CHS, press and hold the power button at least 3
seconds, until the blue LED turns off.
CHAPTER 3: SETUP FOR WINDOWS MOBILE 25