8. Select the checkbox for SocketScan and click Next.
9. Click Finish.
10. After the software finishes loading, click Close.
Press and hold the small power button for 3 seconds, until
the LED turns blue and the scanner beeps. The LED should blink
blue once every second to show that the Bluetooth radio is on
but not connected.
Time after turning on scanner Bluetooth mode
0-5 minutes Discoverable and connectable
5-10 minutes Connectable
10-20 minutes Not discoverable or connectable
20 minutes Scanner automatically powers off
1. In the Home Screen, click Set Up Bluetooth.
If your device does not have the Set Up Bluetooth option, click
Settings then Bluetooth.
2. A dialog will ask you to make sure the Bluetooth device is in
pairing mode (connectable mode). Click OK.
3. Your smartphone will begin searching for Bluetooth enabled
devices in range.
4. In the list of found devices, click Socket CHS [xxxxxx].
The characters in brackets are the last 6 characters of
the scanner’s Bluetooth Device Address, which is
printed on a label inside the battery compartment.
5. When prompted to enter a numeric passkey, type 1234.
6. A dialog will report that pairing is complete.
78