SYMBOLOGY SELECTOR
The feature makes it easy to modify which symbologies you want
the scanner to recognize. By default, the scanner is set to
recognize several of the most common symbologies.
You can configure symbologies only when the CHS is
connected to your smartphone.
1. In the SocketScan menu, click Symbology Selector.
2. In the screen that appears, press the space key to check the
symbologies you wish to enable. Uncheck those you wish to
disable.
3. In the Options menu, click Save.
Enabling all possible symbologies will make the
decode process slightly longer.
SCANNER SETTINGS
You can configure scanner settings only when the CHS
is connected to your smartphone.
1. In the SocketScan menu, click Settings.
2. In the Settings screen, enter any settings, as desired:
• Prefix: Type characters you would like appended before
scanned data (100 character maximum). Besides special data
items, only printable ASCII characters can be used.
• Suffix: Type characters you would like appended after
scanned data (100 character maximum). Besides special data
items, only printable ASCII characters can be used. The default
suffix is a carriage return [CR].
• Beeper Frequency: Select the frequency of the beep that the
CHS emits to indicate good scans, power on/off, connection/
disconnection, etc.
CHAPTER 7: SETUP FOR RIM BLACKBERRY 81