Broadcom (Widcomm) Bluetooth Stack:
1. Perform a Quick Connect to a Bluetooth Serial Port. Click the
Bluetooth icon in the task tray. Click Quick Connect |
Bluetooth Serial Port | Find Devices.
It is essential to connect to the CHS via Quick Connect because
this sets the CHS as your default Bluetooth serial device.
2. During the device search, the CHS will appear as Socket CHS
[xxxxxx]. The characters in brackets are the last 6 characters
of the scanner’s Bluetooth Device Address, which is printed on
a label inside the battery compartment.
3. If a passkey is requested, enter 1234. To indicate the
connection, the CHS will beep once.
By default, the Bluetooth software will ask you for the
passkey each time you connect.
To stop the automatic prompts, under Advanced
Configuration, disable the Secure Connection requirement for
both the Local Service and Client Application, then unpair the
devices. Refer to the documentation for your Bluetooth
hardware/software for complete instructions.
CHAPTER 5: SETUP FOR WINDOWS XP & WINDOWS VISTA 51