1. Right-click the SocketScan icon at the bottom of the screen and
click Connect CS.
After you configure the correct Bluetooth hardware settings
in SocketScan, the Connect CS menu option allows you to
connect to the CHS directly from SocketScan, instead of
manually connecting via your Bluetooth software.
The Connect CS option will not appear unless you checked
the box Enable CS Support in the SocketScan settings.
2. If you are using the Microsoft Bluetooth stack, a balloon will
report that a device is requesting to connect. Click on the
balloon. As prompted, enter the passkey 1234 to connect.
3. SocketScan will begin to connect to the CHS. A status balloon
will report that SocketScan is opening the scanner.
4. After they connect, the CHS will beep, and the task tray icon
will change to an image of a scanner. A status balloon will
report that the scanner is ready to use.
54