PREFIXES/SUFFIXES The SocketScan utility lets you specify prefix and/or suffix
characters to be added automatically to the data you scan. This
helps to further eliminate manual data entry.
1. In the SocketScan menu, press 3 Settings.
You can configure prefix/suffixes whether or not the
CHS is connected to the CK30.
2. In the Settings menu, press 1 Prefix and suffix.
3. In the screen that appears, enter the characters you want to
be appended to each scan (128 character maximum).
By default, SocketScan enters a carriage return after every
data scan.
• Use \r for Carriage Return, \n for Linefeed, \t for Tab., \\ for a single \
character.
• Other characters can be typed or entered using the format
\nnn, where nnn = ASCII character 001 through 255.
4. When you have finished entering prefixes/suffixes, press Esc.
CHAPTER 4: SETUP FOR INTERMEC CK30 39