Track Bus Master Controls
The output level of the console’s 24 mono Track busses is set by a group of rotary
controls in the upper right of the centre section (see left). They all have 10dB of gain
when turned fully clockwise; an indent at the ‘12 o’clock’position corresponds to 0dB
gain. Following level control, the bus outputs can be injected with tone (oscillator TRACK
button) and talkback (talkback SLATE button) before being fed to a D-connector on the
centre section connector panel.
An AFL function (post tone and talkback inject) is provided for each bus.The AFL signal
is intelligently assigned to left and right AFL busses. Selecting AFL on a single Track bus
output will route signal to both left and right AFL busses. Selecting AFL on odd and even
numbered Track bus outputs will route the odd numbered output to the left AFLbus and
the even numbered output to the right AFL bus.
A set of LCD bargraph meters in the centre section are dedicated to metering the bus
outputs.
BUS 8
+10
∞
BUS
6
+10
∞
BUS 5
+10
∞
BUS
4
+10
∞
BUS
2
+10
∞
BUS 1
+10
∞
TRACK BUS
MASTERS
BUS 7
+10
∞AFL
AFL
AFL
AFL
BUS 3
+10
∞AFL
AFL
AF
L
AFL
Track Bus Masters
2-21
Duality Operator’s Manual