Logic Template
RDY and SEL (2)
As with the HUI protocol, the RDY and SEL buttons determine the function of the channel strip’s SEL button.
The default is the SEL(ECT) function; RDY accesses DAW track arming via the channel SEL button. The centre
(blank) button is used as a discrete function in some of the templates, and corresponds to the EDIT/GLOBAL
button located next to the FLIP button on a Mackie Control unit.
Channel and control surface banking (3)
These are used in exactly the same way as in HUI Mode.
Project/Menu buttons (4)
These offer similar functions to those in HUI mode but are template specific.
Modifier buttons (5)
Again, these are Layout and Name template specific.
Dedicated Functions (6), (7), (8)
These are all template specific.
The Logic Template
Duality emulates a Mackie Control unit plus multiple Mackie XT fader expanders. Logic will accept the full 48
fader control offered by Duality. The control surface set up should be configured as shown below in the Logic
Preferences menu:
This layout ensures that when the channel D-pots are used to select master functions, they will be located next
to Duality’s physical centre section, not at the far end of the console.
Duality Operator’s Manual 3-29