If your satellite receiver uses a
If you have a satellite receiver that uses telephone cable in place of serial cable, you will need to use the RJH to
The Ethernet cable connects to the ETHERNET jack on ReplayTV, allowing you to connect ReplayTV to a broadband network. If you have a home network, you should leave ReplayTV connected to it at all times, because ReplayTV will use it to receive Channel Guide listings.
The telephone cable connects from the TEL LINE jack on ReplayTV to a wall jack. Leave the cable connected to ReplayTV at all times to receive the daily Channel Guide listings.
A VGA cable (not included) delivers the best picture quality, if supported by your television or monitor. ReplayTV currently supports RGB (VGA) and YPbPr (component) progressive video formats. If your televi- sion or monitor has a VGA input connector, use a standard VGA cable.
Macrovision protected programming will be recorded if you use the YPbPr video setting but cannot be viewed using this setting. You must change the video setting to “RGB” or “None” to view Macrovision protected pro- gramming. Select Video Output Settings from the Setup screen to change the setting.
