Sonic Blue 4500 manual DRD223RD, and DS2122RD will all require this adapter

ReplayTV 4500

ConnectingReplayTV toReplayTVVCR if you wanttotoawatchVCRor save your record- ings videotape. Deleting recordings from the Replay Guide will pre- serve hard drive space.

•an A/V cable from the OUTPUT jacks on ReplayTV to the AUDIO/VIDEO IN jacks on your VCR, matching like colors.

•ReplayTVConnectingYou can connect avideoVideocameraCameraor VCR fromorits OutputsVCRtothe Inputs ReplayTV and record the content onto ReplayTV using the Manual Record feature. See “Using Manual Record” on page 38.

ConnectingIf you connect cableCablebox or satelliteBoxreceiverandtoSatelliteReplayTV, youReceiverwill need to attachControllersa controller cable so ReplayTV can change the channels either of these components. The controller, either a serial cable or an IR blaster cable, will act as a remote control for these components.

If your satellite receiverSerialor cable boxCablesupports serial cable, use the provided serial cable as a controlling cable. Connect the serial

cable to the SERIAL CONTROL connector on ReplayTV and	the serial port your cable box or satellite receiver. If your
receiver uses 15-pin serial connector, use the supplied 15-pin	9-pin adapter. If you have a satellite receiver that uses telephone

cable place of serial cable, you will need to use the RJH to 9-pin adapter to connect the satellite receiver to ReplayTV. RCA mod-

els DRD221RD, DRD222RD,the DRD223RD, and DS2122RD will all require this adapter.

Use the IR blaster if yourIRsatelliteBlasterreceiver or cable box does not support serial cable.

Infrared Emitters

LocateThe infraredtheinfraredemitter at thedetectorend of the onIR blasteryourmustcablebeboxplacedordirectlysatelliteoverreceiverthe infrared detector on your cable box or satellite receiver. The infrared detector receives the signals from the ReplayTV remote control.