Sonic Blue 4500 manual Refer to

::PlanningRead this section before incorporatingyourReplayTVSetupinto your entertainment system.

IncorporatingReplayTV controls and recordsReplayTVthe televisionintosignalsyourreceiveEntertainment(satellite, cable, antenna,Systemor a combination of all three). The sig-

nal(s) connect directly to the	inputs. The outputs from ReplayTV connect to a television, monitor, or A/V receiver. You
can also connect VCR to	and save shows	have recorded to videotape. See “Saving Recordings to Videotape” on
page 46 for more information.	is not intended to record signals sent by DVD players and video game systems. Connect

DVD players and video game systems directly your television, not to ReplayTV.

ReplayTVCheckingreceivesyourbroadcastSatellitesignals from Receiversatellite receivers through S-Video or A/V cables. ReplayTV can send channel-changing signals to your satellite receiver through the supplied serial cable or IR blaster. It is recommended that you connect your ReplayTV to your satellite receiver using serial cable. Use the IR blaster if your satellite receiver does not have a serial port.

If the remote control for your satellite receiver has a “UHF” label, or if your satellite receiver uses a small antenna, your satellite

receiver is radio controlled.does not support radio-controlled receivers. Check your receiver’s owner’s manual to see if

serial infrared controls are supported.

1ReceiverConnectingthe incomingReplayTVtelevision signaltoanReplayTV.A/V	Refer to the
Quick Setup Guide for detailed instructions.

2an A/V cable from the OUTPUT jacks on ReplayTV to the AUDIO/VIDEO IN jacks on your A/V receiver, matching like col- ors. Use an S-Video cable if your receiver has S-Video In.

3Refer to the Quick Setup Guide to complete the remaining connec-

tions.

gniteGsnoitceCputeScisaBdnvAplHdetraSsnoitarepOuF