SonicWALL 4000  Connecting the SonicWALL Sslvpn, Scenario a Connecting the SonicWALL Sslvpn

Connecting the SonicWALL SSLVPN 4000

Before continuing, reference the diagrams on the following pages to connect the SonicWALL SSL VPN 4000 to your network. Refer to the table in “Selecting a SonicWALL Recommended Deployment Scenario” on page 4 to determine the proper scenario for your network configuration.

•“Scenario A: Connecting the SonicWALL SSL VPN 4000” on page 17

•“Scenario B: Configuring Your Network Interface” on page 18

•“Scenario B: Connecting the SonicWALL SSL VPN 4000” on page 19

•“Scenario C: Configuring Your Network Interface” on page 19

•“Scenario C: Connecting the SonicWALL SSL VPN 4000” on page 20

Scenario A: Connecting the SonicWALL SSLVPN 4000

To connect the SonicWALL SSL VPN 4000 using Scenario A, perform the following steps:

1.Connect one end of an Ethernet cable to the OPT, X2, or other unused port on your existing SonicWALL UTM appliance.

Scenario A: SSL VPN on a New DMZ

	SonicWALL UTM Appliance
	Switch/
Router	Hub

X1

X0

OPT, X2, etc.

SonicWALL SSL-VPN 4000

X0

DMZ

Remote Users

Network Nodes

Internet Zone

LAN

2.Connect the other end of the Ethernet cable to the X0 port on the front of your SonicWALL SSL VPN 4000. The X0 Port LED lights up green indicating an active connection.

Continue to Step

SonicWALL SSL VPN 4000 Getting Started Guide Page 17