Create access to the LAN for NetExtender:
1.In the Firewall > Access Rules page, click 
.
2.In the Welcome to the SonicWALL Network Access Rules page, click Next.
3.In the Step 1: Access Rule Type page, select General Rule. Click Next.
4.In the Step 2: Access Rule Service page, select Any. Click Next.
5.In the Step 3: Access Rule Action page, configure:
Select Action for this | Allow |
Rule |
|
|
|
TCP Connection | 30 minutes |
Inactivity Timeout |
|
|
|
Click Next.
6.In the Step 4: Access Rule Source Interface and Address page, perform the following selections and click Next:
Interface | DMZ |
|
|
IP Address Begin | The beginning of the NetExtender range within your DMZ |
| range, for example, 10.1.1.220 |
|
|
IP Address End | The end of the NetExtender range within your DMZ range, for |
| example, 10.1.1.250 |
|
|
Click Next.
7.In the Step 5: Access Rule Destination Interface and Address page, perform the following selections and click Next:
Interface | LAN |
|
|
IP Address Begin | * |
|
|
IP Address End | Leave blank |
|
|
8.In the Step 6: Access Rule Time page, leave Time Active set to Always Active unless you want to limit when you want SSL VPN clients to have access to the LAN.
9.In the Congratulations page, click Apply to create the access rule.
Continue to Step
Page 40
