If you are allowing HTTP access to the SonicWALL SSL VPN appliance, create a public server access rule for HTTP:
1.In the Firewall > Access Rules page, click 
.
2.In the Welcome to the Network Access Rules Wizard page, click Next.
3.In the Step 1: Access Rule Type page, select Public Server Rule. Click Next.
4.In the Step 2: Public Server page, perform the following selections and click Next:
Service | Web (HTTP) |
|
|
Server IP Address | The X0 IP address of the SonicWALL SSL VPN appliance |
| within your DMZ range, for example 10.1.1.200. |
|
|
Destination Interface | DMZ |
|
|
5.In the Congratulations page, click Apply to create the rules and allow access from the WAN to the SonicWALL SSL VPN appliance on the DMZ.
Scenario B: Allowing DMZ -> LAN Connection in SonicOS Standard
When users have connected to the SSL VPN, they need to be able to connect to resources on the LAN. You need to create two
Note: This procedure uses the Access Rule Wizard to create the rules. You can add the rules manually by clicking Add at the bottom of the Firewall > Access Rules page.
Create access to the LAN for the SSL VPN X0 interface:
1.In the Firewall > Access Rules page, click 
.
2.In the Welcome to the SonicWALL Network Access Rules Wizard page, click Next.
3.In the Step 1: Access Rule Type page, select General Rule. Click Next.
4.In the Step 2: Access Rule Service page, select Any. Click Next.
5.In the Step 3: Access Rule Action page, configure:
Select Action for this | Allow |
Rule |
|
|
|
TCP Connection | 30 minutes |
Inactivity Timeout |
|
|
|
Click Next.
SonicWALL SSL VPN 4000 Getting Started Guide | Page 37 |
