Scenario A: Allowing SSL VPN
When users have connected to the SSL VPN, they need to be able to connect to resources on the LAN.
1.In the administration interface, navigate to the Network > Address Objects page.
2.At the bottom of the page, below the Address Objects table, click .
3.In the Add Object dialog box, create an address object for the X0 interface IP address of your SonicWALL SSL VPN 4000:
Name | Enter a name for the SonicWALL SSL VPN 4000 |
|
|
Zone Assignment | SSL VPN |
|
|
Type | Host |
|
|
IP Address | The SonicWALL SSL VPN 4000’s X0 IP address, |
| 192.168.200.1 by default |
|
|
Click OK to create the object.
4.Click again to create an address object for the NetExtender range.
5.In the Add Object dialog box, create an address object for the X0 interface IP address of your SonicWALL SSL VPN 4000:
Name | Enter a name for NetExtender |
|
|
Zone Assignment | SSL VPN |
|
|
Type | Range |
|
|
Starting IP Address | The start of the NetExtender IP address range, |
| 192.168.200.100 by default |
|
|
Ending IP Address | The end of the NetExtender IP address range, |
| 192.168.200.200 by default |
|
|
Page 32