SonicWALL Email Security 7.0 8000 manual 1P P/N 25K9195

28 Email Security Software

7

8

Extend the cable-management arm and fasten the cables:

Attention: Make sure that you route Fibre Channel cables through the tab
1, to ensure proper bend radius and prevent damage to these cables.

Extend the cable-management arm by sliding the server toward the front of the rack. The rail-lock pins stop the server halfway along the rack. Secure the cables by using the straps that are attached to the cable-management arm.

Slide the server back into the rack cabinet.

Secure the server to the rack:

Before you transport the rack cabinet to another location with the server installed, you must secure the server to the rack. If necessary, disconnect the cables from the rear of the server; then, slide the server out of the rack 150 mm (6 in.) and insert the M6 screws in each slide rail. Then, secure the server to the rack cabinet with the M6 screws and reconnect the cables.

To remove the server from the rack, reverse these instructions. Store this information with your server documentation for future use.

First Edition (July 2004)

Printed in the U.S.A.

IBM is a trademark of the IBM Corporation in the United States, other countries, or both.

© Copyright International Business Machines Corporation 2004. All rights reserved.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

(1P) P/N: 25K9195