C-6

Sonos Multi-Room Music System User Guide

3.During the setup process, you’ll be asked to register your Sonos Multi-Room Music System. You need to be registered in order to receive Sonos technical support and free software upgrades, as well as to activate free music service trial subscriptions for services like Rhapsody and Napster.

4.When you see the message Setup Complete, press OK.

5.Connect the NAS device to your computer, and then access the Web Configuration utility (see your product documentation for instructions on setting a static IP). Through this interface, specify a static IP address for the NAS of 169.254.x.x (e.g. 169.254.10.100) and a subnet mask of 255.255.0.0.

6.Once you have saved these settings, disconnect the NAS box from your computer and connect it to one of the Ethernet ports on the back of the ZonePlayer or ZoneBridge.

7.Press the Music button on your Sonos Controller twice to display the Music menu.

8.Select System Settings>Music Library Management >Music Library Setup.

9.Select Add New. At this point the Sonos System may detect your share automatically. If it does not, select Enter New>Type…

10.Type the path for this folder, \\NASname\sharename, where NASname is the network name for your NAS device and sharename is the name of the top level shared folder, and then press Accept.

11.Press OK.

Page 205
Image 205
Sonos Multi-Room Music System manual When you see the message Setup Complete, press OK