Chapter 2: System Setup

2-13

 

Using the Desktop Controller software, select Zones>ZoneBridge Settings. Highlight the ZoneBridge, and then click Settings.

Using the Sonos Controller, select System Settings>ZoneBridge Settings from the Music menu.

Add a ZonePlayer

Note: If you are replacing the Sonos component (ZonePlayer or ZoneBridge) that is currently connected to your router, first add the new ZonePlayer to your music system (see steps below). You can then unplug the component from your router, replace it with the new ZonePlayer, and move the original Sonos component to a new location.

If your house has structured (built-in) wiring, you can make a ‘wired’ connection to the new Sonos component. Otherwise, you can connect wirelessly.

Caution: Do not place any items on top of your ZonePlayer. This may impede the air flow and cause your ZonePlayer to overheat.

1.Place the ZonePlayer in the room you have selected, and apply power.

2.If you are making a wired connection, connect a standard Ethernet cable from either your router, another ZonePlayer, or a ‘live’ network wall plate to any of the Ethernet switch connections on the back of the new ZonePlayer. If you are making a wireless connection skip this step and proceed to step 3.

3.Choose one of the following options:

If you are adding an amplified ZonePlayer, attach desired speakers (see "If you are connecting a ZonePlayer 120/100" on page 2-6 if you need help with this step).

If you are adding a ZonePlayer 90/80, connect an external amplifier (see "If you are connecting a ZonePlayer 90/80" on page 2-7 if you need help with this step).

4.Choose one of the following options:

Using the Desktop Controller software, select Add a ZonePlayer or ZoneBridge from the Zones menu.

Or,

Page 28
Image 28
Sonos Multi-Room Music System manual Add a ZonePlayer