Chapter 2: System Setup

2-7

 

4.Insert the stripped end of the speaker wire into the hole, then release. The stripped portion should be caught firmly in the connector post.

5.Repeat to install the other speaker wires.

If your speakers have banana

connectors, you can insert the plugs directly into the banana jacks on the back of the ZonePlayer 120 instead (available in North America only)

6.Attach the power cord and plug into a wall outlet—make sure the Voltage Switch on the back of the ZonePlayer is set to the proper position for your country before applying power.

The Mute button indicator and the ZonePlayer Status indicator will begin to flash. (If this ZonePlayer was previously connected to another Sonos Multi-Room Music System, the ZonePlayer Status indicator may light solid white instead.)

If you are connecting a ZonePlayer 90/80

1.Attach the power cord and plug in the ZonePlayer.

The Mute button indicator and the ZonePlayer Status indicator will begin to flash. (If this ZonePlayer was previously connected to a Sonos Multi-Room Music System, the ZonePlayer Status indicator may light solid white instead.)

2.Connect your ZonePlayer 90/80 to an external amplifier by choosing one of the following options:

Page 22
Image 22
Sonos Multi-Room Music System manual If you are connecting a ZonePlayer 90/80, If your speakers have banana