Alarm messages and associated directions
Alarm message on monitor screen | Direction | Alarm message in time | |
(Cause) |
|
| counter display |
|
|
|
|
A cleaning tape has been inserted. | The tape will automatically be ejected after cleaning is | Cleaning Tp! | |
| completed. |
| |
|
|
|
|
A | Use a standard signal. | VIN | |
input video. |
|
|
|
|
|
|
|
A | Use a standard signal. | REF | |
for REF. VIDEO. |
|
|
|
|
|
|
|
Abnormal settings selected in setup | Correct the setup menu settings. Contact your Sony | ILL. SETUP! | |
menu. | dealer if this alarm message appears again after |
| |
| making corrections. |
| |
|
|
|
|
Audio mixing mode cannot be changed | − | REC mode! | |
during recording. |
|
|
|
|
|
|
|
Audio not editable on this tape. | Use a tape recorded in | 2CH/32kHz! | |
|
|
| |
|
| Fs 44.1kHz! | |
|
|
| |
|
|
| |
| Use a tape having audio signals recorded in locked | UNLOCK mode | |
| mode. |
| |
|
|
| |
Audio REC mode selection different from | Select the same audio recording mode as that of the | A mode err | |
audio on tape. | tape. |
| |
|
|
| |
Audio REC (recording) mode cannot be | − | REC mode! | |
changed during recording. |
|
|
|
|
|
| |
Cassette adaptor not usable. | Use a tape without cassette adaptor. | Adaptor! | |
|
|
| |
Counter mode is selected. | Use the COUNTER SELECT button to light the TC or | CNT mode! | |
|
| ||
|
|
| |
Input selection cannot be changed in | − | REC mode! | |
REC (recording) mode. |
|
|
|
|
|
| |
Input signal does not conform to | − | Unknown Sig | |
DVCAM/DV format. |
|
|
|
|
|
| |
Input signal is 625/50. (For | − | 625/50 sig! (For DSR- | |
|
|
| 1500A) |
|
|
| |
Input signal is 525/60. (For DSR- | − | 525/60 sig! (For DSR- | |
1500AP) |
|
| 1500AP) |
|
|
| |
Input video is not detected. | Check the VIDEO indicator in the INPUT signal | No INPUT! | |
| display section and supply an appropriate video |
| |
| signal. |
| |
|
|
| |
Input video signal does not synchronize | Use a reference video signal. | ILL. REF! | |
with REF. VIDEO signal. |
|
|
|
|
|
| |
Moisture has been detected. | Keep the power on and wait until this alarm message | HUMID! | |
| disappears. |
| |
|
|
| |
No cassette in VTR. | Load a cassette. | No Cass.! | |
|
|
| |
Non DVCAM/DV(SP) format source. | − | No DVCAM/DV | |
|
|
| |
Rec inhibit mode is selected. | Set the REC INHIBIT menu item (see page 65) to | REC INHI.! | |
| OFF. |
| |
|
|
| |
Record inhibit plug on the cassette is set | Set the REC/SAVE switch on the cassette to REC. | REC INHI.! | |
to inhibit. |
|
|
|
|
|
| |
Remote mode is selected. | Set the LOCAL/REMOTE switch to LOCAL. | REMOTE! | |
|
|
| |
Select DVCAM recording format. | Set the REC FORMAT menu item (see page 65) to | Not DVCAM! | |
| DVCAM. |
| |
|
|
| |
Tape cannot be replayed. | Use a tape recorded in 525/60 format. (For DSR- | 625/50 Tape (For DSR- | |
| 1500A) | 1500A) | |
|
|
| |
| Use a tape recorded in 625/50 format. (For DSR- | 525/60 Tape (For DSR- | |
| 1500AP) | 1500AP) | |
|
|
|
|
Troubleshooting and Maintenance 6 Chapter
Troubleshooting 107