Overview 1 Chapter
When
2 3/4 button:
Audio level meters | PHONES | MONITOR |
| connector | connector |
|
|
|
Channel 3 only | Channel 3 only | |
Only the left meter lights. | (monaural) |
|
|
|
|
Channel 4 only | Channel 4 only | |
Only the right meter | (monaural) |
|
lights. |
|
|
|
|
|
Channels 3 | Channels 3 | |
3 and 4). | and 4 (stereo) | and 4 (mixed) |
Both the left and right |
|
|
meters light. |
|
|
|
|
|
jMETER
Pressing this button toggles the audio level meter mode between
The settings made with this button and the MONITOR SELECT button select the channels for level indications and audio output.
For more details, see “iMONITOR SELECT button.”
kCOUNTER SELECT button
Selects the type of time data to be shown in the time counter display. Each press of this button cycles through the following three indicator display options:
•COUNTER (CNT: count value of the time counter)
•TC (time code)
•
Note
If the LOCAL/REMOTE switch is set to REMOTE, the COUNTER SELECT button does not operate while the tape is moving. In this case, make the time data selection via the external equipment connected to the REMOTE connector on the rear panel.
lCONTROL S connector (stereo minijack) Connect a
aREC/PB LEVEL control knobs
1
REC/PB
LEVEL
2
3
4
VAR
REC
PBPRESET
bVAR switch
aREC/PB LEVEL control knobs
These knobs used to control audio levels function differently depending on the setting of the VAR switch as follows.
VAR switch | Functions of control knobs |
setting |
|
|
|
PRESET | Control knobs are not effective. |
| The analog audio input/output levels are set to |
| the reference level set with the LEVEL |
| SELECT menu item (see page 72). |
|
|
REC | Control the analog/digital audio input levels on |
| channels 1 to 4 during recording. |
|
|
PB | Control the analog/digital audio output levels |
| on channels 1 to 4 during playback. |
|
|
bVAR switch
Use to switch the way in which the REC/PB LEVEL control knobs function.
14 Location and Function of Parts