When the REMOTE indicator is lit, selection of the time data type is carried out at the editing control unit.
5 Select the formats of video and audio input signal to be recorded.
Use the INPUT SELECT buttons in the video/audio input setting section to select the desired signal formats. Each selection is shown by a lit indicator in the INPUT signal display section.
Video input signal | Corresponding INPUT | Lit indicator in the |
(input connector) | SELECT button | INPUT signal display |
|
| section a) |
Composite signal | VIDEO | COMPOSITE in VIDEO |
(VIDEO IN: Y/CPST) |
| group |
|
|
|
Separated Y/C signal | VIDEO | S VIDEO in VIDEO |
(VIDEO IN: Y/CPST and |
| group |
R−Y/C) |
|
|
|
|
|
Component signal | VIDEO | Y−R,B in VIDEO group |
(VIDEO IN: Y/CPST, |
|
|
R−Y/C, and B−Y) |
|
|
|
|
|
SDI signal | VIDEO | SDI in VIDEO group |
(SDI/SDTI (QSDI) IN) |
|
|
|
|
|
SDTI (QSDI) signal | SDTI/i.LINK | SDTI: both SDTI video |
(SDI/SDTI (QSDI) IN) |
| and audio input |
|
| signals are |
|
| recorded. |
|
| V:SDTI: only SDTI video |
|
| input signal is |
|
| recorded. |
|
|
|
SDTI/i.LINK | i.LINK | |
video signal in DV format |
|
|
(i.DV IN/OUT) |
|
|
|
|
|
Internal test video signal | VIDEO | SG in VIDEO group |
|
|
|
a)The indicators without the corresponding optional boards
Audio input signal | Corresponding INPUT | Lit indicator in the |
(input connector) | SELECT button | INPUT signal display |
|
| section a) |
Analog signal | CH1 1/2 and CH2 3/4 | ANALOG in AUDIO |
(AUDIO IN 1/3 and |
| group |
AUDIO IN 2/4) |
|
|
|
|
|
AES/EBU signal | CH1 1/2 and CH2 3/4 | AES/EBU in AUDIO |
(AUDIO (AES/EBU) IN) |
| group |
|
|
|
SDI signal | CH1 1/2 and CH2 3/4 | SDI in AUDIO group |
(SDI/SDTI (QSDI) IN) |
|
|
|
|
|
SDTI (QSDI) signal | SDTI/i.LINK | SDTI |
(SDI/SDTI (QSDI) IN) |
|
|
|
|
|
SDTI/i.LINK | i.LINK | |
audio signal in DV format |
|
|
(i.DV IN/OUT) |
|
|
|
|
|
Internal test audio signal | CH1 1/2 and CH2 3/4 | SG in AUDIO group |
|
|
|
a)The indicators without the corresponding optional boards
Caution
Once you have started recording, you cannot change the input signal selection.
Playback and Recording 2 Chapter
Recording 33