
Operation Editing for Functions Convenient 3 Chapter
4 Press the F button to select “TC INSERT.”
AUTO FUNCTION MENU |
| TC insert |
SDTI DUBBING |
| |
i.LINK DUBBING |
| Time counter display |
|
| |
TC INSERT |
| |
|
| |
|
|
|
Monitor screen
5 Press the G button.
The following message appears.
TC INSERT |
| Set tape! |
|
| |
|
|
|
|
| Time counter display |
INSERT THE TAPE IN |
|
|
THIS VTR. |
|
|
ABORT:MENU KEY |
|
|
|
|
|
Monitor screen |
|
Note
If the recording format is not DVCAM, a different message appears.
See “When recording format is not DVCAM” (page 54).
6 Insert the cassette.
A message to confirm the TC insert operation appears.
TC INSERT | TC insert? |
| |
|
|
| Time counter display |
START TC INSERT? |
|
START:YES KEY
ABORT:MENU KEY
Monitor screen
To cancel the TC insert operation
Press the MENU button.
7 Press the SET (YES) button.
Time code recording starts from the current tape position.
TC INSERT |
| Executing |
|
| |
|
|
|
|
| Time counter display |
EXECUTING. |
|
|
TCR 00:00:00:00 |
|
|
UBR 00:00:00:00 |
|
|
ABORT:MENU KEY |
|
|
|
|
|
Monitor screen |
|
Note
If the recording format of the tape is not DVCAM, a different message appears.
See “When the recording format of the tape is not DVCAM” (page 54).
When the recording ends, the message “TC INSERT COMPLETED. PUSH THE YES BUTTON.” appears on the monitor screen and “Completed” appears in the time counter display.
8 Press the SET (YES) button to exit the menu.
When recording format is not DVCAM
When you carry out step 5 of the foregoing procedure, the following message appears.
TC INSERT |
| Not DVCAM! |
|
| |
|
|
|
NO TC INSERT FUNCTION |
| Time counter display |
|
| |
AVAILABLE, DV RECORDING |
|
|
FORMAT SELECTED. |
|
|
SELECT DVCAM RECORDING |
|
|
FORMAT. |
|
|
PUSH THE YES BUTTON. |
|
|
|
|
|
Monitor screen
Press the SET (YES) button to end the operation and do it over again after setting the REC FORMAT menu item (see page 65) to DVCAM. You can use the TC insert function in DVCAM format only.
When the recording format of the tape is not
DVCAM
When you carry out step 7 of the foregoing procedure, the following message appears.
54 Setting the Time Data