Sony 1500A, 1500AP manual 35

1

LOCAL/REMOTE switch

dB	dB	INPUT	VIDEO	AUDIO		U-BIT	SERVO		CL REC INHI
0	0	V:SDTI
			COMPOSITE CH-1 1/2 CH-2 3/4			TC	COUNTER		NO EDIT	REPEAT
-12	-12	SDTI	S VIDEO	ANALOG	ANALOG
-20	-20	i.LINK	Y-R,B	AES/EBU	AES/EBU
			SDI SG	SDI SG	SDI SG
-30	-30	OUTPUT		AUDIO
-40	-40		VIDEO			HOURS		MINUTES	SECONDS	FRAMES
-60	-60	SDI	COMPOSITE	CH 1/2
		SDTI	S VIDEO	CH 3/4		PB FS		REC MODE	VITC	REMOTE
CH- 1	3 CH- 2	4	Y-R,B			48K 44.1K 32K		2CH 4CH	EDIT MODE	9P i.LINK
	REW		PLAY		F FWD			STOP		REC

Recorder (DSR-1500A/1500AP)

2

1 2 3 4 PB FS 48k44.1k32k

Player3 (DSR-1600/1600P, etc.)

Notes

•When controlling this unit from an editing control unit connected to the REMOTE connector of this unit, set the LOCAL/REMOTE switch to REMOTE, turning the REMOTE indicator on. When not, set the switch to LOCAL, turning the indicator off.

•If you intend to use a tape recorded on this unit in a system comprising a DSR- 85/85P and an ES-7 EditStation, it is recommended to record color bars on at least the first 40 seconds of the tape.

When transferring digital signals from the DSR-85/85P to the ES-7 EditStation at four times normal speed, there must be recording for approximately 40 seconds before the IN point.

1 After checking the following items, hold the cassette with the tape window facing upward, then insert it into the recorder (this unit) as illustrated on page 29.

.

Item to check	See section
Make sure that the REC/SAVE switch	“Preventing accidental erasure” on
of the cassette is set to REC.	page 29
Check for tape slack.	“Checking the tape for slack” on page
	28
Make sure that the “HUMID!” alarm is	“Condensation” on page 101
not shown in the time counter display.

The cassette is automatically drawn into the unit and the tape is wound round the head drum. The tape is stationary while the head drum rotates, and the STOP button lights.

Playback and Recording 2 Chapter

Recording 35