EEOUT PHASE settings for time code output

Use the following as reference information when setting the EE OUT PHASE menu item (see page 69).

THROUGH mode

In this mode, the LTC signal is output with the phase synchronized with the input time code signal. This mode is appropriate when recording signals from multiple devices on a number of VCRs.

When the camcorder is in genlock mode, the time code precision is ±0 frames. When the camcorder is not in genlock mode, it is ±1 frame.

VIDEO INPUT PHASE mode

The time code output signal is synchronized with the input video signal.

This mode is appropriate when the output from a single device is recorded on a number of VCRs. The connections are loop-through connections.

In this mode, the same time code is recorded on all of the VCRs 1 to n.

Note

The optional boards (see page 9) corresponding to the input signal formats to be used are required.

Note

The optional boards (see page 9) corresponding to the input signal formats to be used are required.

VIDEO OUT

VIDEO IN

VIDEO LOOP THRU

TIME CODE IN

TIME CODE OUT

Camcorder 1

Camcorder 2

VIDEO IN

AUDIO IN

TIME CODE IN

TIME CODE OUT

DSR-1500A/1500AP (1st unit)

VIDEO IN

AUDIO IN

TIME CODE IN

TIME CODE OUT

DSR-1500A/1500AP (2nd unit)

VIDEO IN

Output device (VCR, camera, etc.)

DSR-1500A/1500AP (1st unit)

VIDEO IN

VIDEO LOOP THRU

TIME CODE IN

TIME CODE OUT

DSR-1500A/1500AP (2nd unit)

VIDEO IN

VIDEO LOOP THRU

TIME CODE IN

TIME CODE OUT

DSR-1500A/1500AP (nth unit)

Settings Menu 4 Chapter

Camcorder n

AUDIO IN

TIME CODE IN

TIME CODE OUT

Composite video or SDI (video and audio) signal Time code signal

DSR-1500A/1500AP (nth unit)

Composite video or S-video signal

Audio signal

Time code signal

Menu Contents 75