| TIME CODE [Time code]: Settings related to the time code | Description of settings | |||
| generator |
|
| ||
|
|
|
|
| |
| VITC POS | (For | |||
| VITC in. |
| 20 LINE [>> 20 line] to 12 LINE [>> 12 line]: Select any line | ||
|
|
|
|
| from 12 to 20. |
| Note |
|
|
| Factory default setting: 16 LINE [>> 16 line] |
| You can insert the VITC signal in two places. To insert it in two |
| |||
| (For | ||||
| places, set both this item and also VITC POS | 22 LINE [>> 22 line] to 9 LINE [>> 9 line]: Select any line | |||
|
|
|
|
| from 9 to 22. |
|
|
|
|
| Factory default setting: 19 LINE [>> 19 line] |
|
|
|
|
| |
| VITC POS | (For | |||
| VITC in. |
| 20 LINE [>> 20 line] to 12 LINE [>> 12 line]: Select any line | ||
|
|
|
|
| from 12 to 20. |
| Note |
|
|
| Factory default setting: 18 LINE [>> 18 line] |
| You can insert the VITC signal in two places. To insert it in two |
| |||
| (For | ||||
| places, set both this item and also VITC POS | 22 LINE [>> 22 line] to 9 LINE [>> 9 line]: Select any line | |||
|
|
|
|
| from 9 to 22. |
|
|
|
|
| Factory default setting: 21 LINE [>> 21 line] |
|
|
|
|
| |
| VITC OUTPUT [> VITC out]: Select the time code to be output | OFF [>> OFF]: Do not output VITC. | |||
| as VITC. |
| TC [>> TC]: Output TC after converting it into VITC. | ||
|
|
|
|
| *VITC [>> VITC]: Output VITC. |
|
|
|
|
| |
| EE OUT PHASE [> EE out]: Determine the output phase for | *MUTE [>> mute]: Mute the output. | |||
| the LTC signal output from the TC OUT connector when | THROUGH [>> through]: Output the time code input to the | |||
| recording time code and in STOP REC mode (forced EE | TC IN connector as it is. (See example configuration on | |||
| mode). |
| page 75.) | ||
|
|
|
|
| VIDEO INPUT PHASE [>> V input]: Output the time code |
|
|
|
|
| with the same phase as the input video signal phase. |
|
|
|
|
| (See example configuration on page 75.) |
|
|
|
|
| VIDEO OUTPUT PHASE [>> V output]: Output the time code |
|
|
|
|
| with the same phase as the output video signal phase. |
|
|
|
|
| (See example configuration on page 76.) |
|
|
|
|
| |
| MUTE IN SRCH [> Mute in SR]: Select whether to mute the | OFF [>> OFF]: Do not mute. | |||
| output from the TC OUT connector in search (jog/shuttle) | *ON [>> ON]: Mute. | |||
| mode. |
|
| ||
|
|
|
|
| |
|
|
|
|
| |
| TAPE PROTECTION [Tape protct]: Settings related to tape | Description of settings | |||
| and video head protection |
|
| ||
|
|
|
|
| |
| FROM STOP [> From STOP]: | STOP TIMER [>> STP | 0.5 SEC [>>> 0.5 sec] to 5 MIN [>>> 5 min]: Select time from | ||
| Set the time to switch from | timer]: Set the time to | 12 settings ranging from 0.5 second to 5 minutes in steps | ||
| stop mode to tape protection | switch from stop mode | of 0.1 second. | ||
| mode. | to tape protection | Factory default setting: 1 MIN [>>> 1 min] | ||
|
|
|
| mode. |
|
|
|
|
|
| |
| FROM STILL [> From STILL]: | STILL TIMER [>> STL | 0.5 SEC [>>> 0.5 sec] to 5 MIN [>>> 5 min]: Select time from | ||
| Set the time to switch from | timer]: Set the time to | 12 settings ranging from 0.5 second to 5 minutes in steps | ||
| still search mode to tape | switch from still search | of 0.1 second. | ||
| protection mode. Also select | mode to tape | Factory default setting: 1 MIN [>>> 1 min] | ||
| the type of tape protection | protection mode. |
| ||
| mode. |
|
|
| |
|
| NEXT MODE [>> Next | *STEP FWD [>>> Step]: The tape is advanced at 1/30 times | ||
|
|
|
| ||
|
|
|
| mode]: Select the type | normal speed for about 2 seconds. |
|
|
|
| of tape protection | |
|
|
|
| STANDBY OFF [>>> STANDBY]: Standby off mode | |
|
|
|
| mode to follow still | |
|
|
|
|
| |
|
|
|
| search mode when the |
|
|
|
|
| time set with the STILL |
|
|
|
|
| TIMER menu item |
|
|
|
|
| elapses. |
|
|
|
|
|
|
|
Settings Menu 4 Chapter
Menu Contents 69