To perform the following operations

Operation

Do this:

 

 

Stop recording.

Press the STOP button.

 

The unit enters stop mode, and will automatically

 

switch to standby off mode after the time period set

 

with the STOP TIMER menu item (see page 69) for

 

tape protection.

 

 

Remove the cassette.

Press the EJECT button.

 

After a few seconds, the tape is unwound from the

 

head drum and the cassette is automatically ejected.

 

If a CNT value is shown on the time counter display

 

(the time data type indicator “COUNTER” is lit), the

 

CNT value is reset.

 

 

Inhibit the unit from

Set the CHARA. DISPLAY menu item (see page 66)

outputting text information

to OFF.

(time data, operation mode

 

indications, etc.) to the

 

video monitor.

 

 

 

Change the time period

Change the setting of the STOP TIMER menu item

before the unit switches

(see page 69).

from stop mode to standby

 

off mode.

 

 

 

Referece level for recording in DV (SP) format

On many consumer DV devices, recording is carried out at a reference level of −12 dB. Threfore, when recording in DV (SP) format on this unit, using the fixed referenced level of −12 dB is recommended. When dubbing DVCAM source material recorded at a different reference level, you can carry out manual adjustment as described in the following.

Playback and Recording 2 Chapter

Player (DSR-1800/1800P/1600a)/1600Pa)/ 1500A/1500AP)

in E-E mode

Recorder (DSR-1500A/ 1500AP)

in E-E mode

Audio input selection: INT SG/1 kHz

REC mode: 2ch or 4ch depending on DVCAM source

Reference level: Reference level of the DVCAM source

VAR switchb): PRESET

a)On the DSR-1600/1600P, tape recorded at the reference level is played back.

b)DSR-1500A/1500AP only

i.LINK/

SDTI (QSDI)/

SDI

REC FORMAT: DV (SP)

VAR switch: REC

For each channel, observing the audio level meter, adjust the audio level to −12 dB with the level control knob.

Recording 37