Settings Menu 4 Chapter

8 To change other settings, press the g button to return

to the previous screen, then repeat steps 5 to 7 as required.

9 When you have completed the settings, press the SET (YES) button.

The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the new settings are saved in memory.

When the saving operation is completed, the monitor screen and time counter display return to their normal indications.

Notes

If you power off the unit before saving operation is completed, settings may be lost. Wait until the saving is completed before powering off the unit.

If, instead of pressing the SET (YES) button, you press the MENU button, the new settings are not saved. The message “ABORT !” appears on the monitor screen and “Abort !” in the time counter display for about 0.5 second, and the system exits the menus. To change more than one setting, be sure to press the SET (YES) button after making the settings.

Meanings of indications on the monitor screen

On-screen indication

Meaning

 

 

Right-pointing arrow (c) at

Pressing the G button

the right of a menu item

switches to the next lower

See step 1 of the foregoing

menu level or to a setting

operating procedure.

selection screen.

 

 

Left-pointing arrow (C) at the

Pressing the g button

left of a menu item

returns to the previous

See step 4 of the foregoing

(higher) menu level.

operating procedure.

 

 

 

Character string at the right of

Current setting of the menu

a menu item

item

See step 4 of the foregoing

When shown with a colon

operating procedure.

(:): the current setting is

 

the same as the factory

 

default setting.

 

When shown with a raised

 

dot (•): the current

 

setting is different from

 

the factory default

 

setting.

 

See step 2 of the

 

operating procedure in

 

Changing the Settings

 

of Enhanced Items.

 

 

An asterisk in a complete list

Factory default setting

of settings

 

See step 6 of the foregoing

 

operating procedure.

 

 

 

Displaying Enhanced Items

The factory default setting is not to display enhanced items.

To display enhanced items, set the MENU GRADE menu item (see page 74) to ENHANCED, following the procedure in the previous section “Changing the Settings of Basic Items.” (In step 3, first select “MENU GRADE,” and next select “ENHANCED,” then press the SET (YES) button to save the setting in memory.)

With this done, when you press the MENU button and the

Gbutton to display the setup menu, all basic and enhanced items on menu level 1 appear.

Changing the Settings of Enhanced Items

To change the settings of enhanced items, first carry out the procedure in the previous section “Displaying Enhanced Items,” then proceed as follows.

MENU

RESET(NO)

TC

1

PRESET

SET(YES)

4

2

3

1 Press the MENU button in the menu control section.

The menu selection level display appears on the monitor.

80 Changing Menu Settings