104 
Trimming an event beyond its end
You can trim an event beyond its end, extending it as a result. Once extended, the event loops as a default. A notch indicates where the looped event repeats.
Alternately, you can turn looping off and make the last frame of an event’s media repeat for the duration of the event (a freeze frame). A notch appears at the point in the event where the video ends and the freeze frame begins. For more information, see Loop on page 171.
Trimming adjacent events
You can trim adjacent events simultaneously. Press Ctrl + Alt while dragging the common edge between two adjacent events. The trim adjacent cursor appears (
).
Press Ctrl+Alt over the |
|
|
boundary between two events... | ...and drag left... | ...or right to trim both events at once. |
Trimming a time selection
Trimming events removes all media the clipboard. Trimming is different
outside the time selection. The removed information is not placed on from cutting in that the events within the time selection are preserved.
1.Select a time range. For more information, see Selecting a time range on page 97.
2.Press Ctrl + T or, from the Edit menu, choose Trim.
The material outside the time selection (across all tracks) is removed from the project. However, the time information (space) between events is not removed.
Events before trim | Clipboard contents | Events after trim |
Trimmed information is not placed on the clipboard.
Trimming a time and event selection
1.Select the events to be trimmed.
2.Select a time range. For more information, see Selecting events and a time range on page 98.
3.Press Ctrl + T or, from the Edit menu, choose Trim.
Only the portion of selected events outside the time selection is trimmed. Unselected events remain. The time information (space) between events is not removed.
Events before trim | Clipboard contents | Events after trim |
Trimmed information is not placed on the clipboard.
BASIC EDITING TECHNIQUES | CHP. 4 |