301
Previewing video on a secondary Windows display
This feature is available only in the full version of Vegas software.
If your Windows desktop is extended across multiple displays, you can one of those displays to preview the timeline with no A/V synchronization
If you intend to deliver your project in an interlaced format, previewing on a computer monitor is not a substitute for previewing on an interlaced broadcast monitor.
To use a Windows display as a monitor, you must have the following:
•A
•A CRT, LCD, or projector connected to your computer’s secondary video output
•The Extend my Windows desktop onto this monitor check box must be selected on the Settings tab or the Display Properties dialog (Start > Settings > Control Panel > Display)
Note: Vegas software allows you to use one external video device at a time. The external monitor display will be unavailable during video capture.
Follow the steps below to set up your preview:
1.Use the Preview Device tab in the Preferences dialog to configure the display you want to use as a video preview monitor.
2.Select the Preview on External Monitor button (
) in the Video Preview window.
•When playback is stopped, the secondary display will match the display of the Video Preview window.
•When you start playback, the Video Preview window will be blank, and the video is played on the secondary display.
Viewing on a broadcast monitor via
To use an external monitor, you must have the following:
•
•DV camcorder or
Note: Vegas software allows you to use one external video device at a time. The external monitor display will be unavailable during video capture.
While configuring your computer for DV external monitor previewing is not difficult, the setup may require some troubleshooting. The Vegas forum is a good resource for
http://mediasoftware.sonypictures.com/forums
CHP. 16 | PREVIEWING AND ANALYZING VIDEO |