350
CD Settings tab
This tab is available only in the full version of Vegas software.
The CD Settings tab allows you to set preferences for burning CDs and extracting audio from your own CDs.
Preference | Description |
Burn drive | Sets the device where you burn |
|
|
Burn speed | Sets the speed at which the device burns the |
Extract optimization | Sets the amount of buffering and restitching done to recover audio from older CD drives. Adjust this setting if |
| your extracted CD audio has occasional gaps or glitches. |
|
|
Autoname extracted tracks | Automatically names extracted CD tracks based on the ISRC number, the track number, and the number of |
| times the track has been extracted. |
Use strict Red Book specification | Select this check box if you want to be notified prior to burning a |
for DAO validation | project is against strict Red Book standards. |
| These warnings are not critical, and in most cases you will not write an unreadable disc if you proceed. Clearing |
| this check box will not suppress critical warnings that will result in an unreadable disc. |
|
|
Include wide SCSI devices when | Select this check box if you want Vegas software to scan for wide SCSI CD drives when you attempt to extract |
searching for drives | data from or burn CDs. |
| When the check box is cleared, Vegas software will not scan for wide SCSI devices, which can increase |
| compatibility with some USB device drivers that incorrectly identify themselves as wide SCSI. |
Skip drive database; autodetect | When the check box is cleared, Vegas software will use an internal configuration file to determine your drive's |
drive capabilities on startup | capabilities. |
| If you encounter problems burning CDs, select this check box, and Vegas software will test your drive to |
| determine its capabilities. |
|
|
Default All | Restores all CD preferences to the default settings. |
|
|
CUSTOMIZING VEGAS SOFTWARE | CHP. 18 |