214

Panning audio

You can pan audio in a 5.1 surround project in two ways:

•Pan tracks individually using the Surround Panner window.

•Route tracks to mixer controls (busses, assignable effect chains) and pan the mixer controls using the Surround Panner window.

Panning tracks

1.Click the Automation Settings button ( ) on the track you want to pan and verify Show Automation Controls is not selected.

2.Double-click the surround panner on the track you wish to pan. The Surround Panner window appears.

Double-click to display the Surround Panner window

3.Adjust the panning settings. For more information, see Using the Surround Panner window on page 216.

4.Close the Surround Panner window.

Tip: You can also use the surround panner in the track header to pan your track.

WORKING WITH 5.1 SURROUND

CHP. 12