219

5.Close the Surround Panner window.

A keyframe with the pan settings you created appears below the track at the cursor position.

New keyframe

Tip: You can also add keyframes by double-clicking the keyframe row or by right-clicking the row and choosing Add Point from the shortcut menu. Once you’ve added the keyframe, double-click it to adjust panning settings in the Surround Panner window.

As you add keyframes to a track or bus track, the Surround Panner window shows the path of the panning keyframes. The Smoothness slider controls the smoothness of the interpolation path between the keyframes. For more information, see Adjusting the Smoothness slider on page 220.

The Surround Panner window shows the path of the panning keyframes.

Working with keyframes

After you add keyframes, you can work with them in much the same way as envelope points. For more information, see Composite level automation (video only) on page 161.

Moving keyframes

Drag a keyframe to a new position below its track.

Duplicating keyframes

Hold Ctrl and drag a keyframe to a new position below its track.

Editing keyframes

1.Double-click a keyframe to open the Surround Panner window.

2.Adjust the panning settings as desired and close the window.

CHP. 12

WORKING WITH 5.1 SURROUND