340
Configuring a Blackmagic Design DeckLink
If you have a Blackmagic Design DeckLink™, you can configure it to work with Vegas software.
1.From the Options menu, choose Preferences to display the Preferences dialog.
2.Select the Preview device tab.
3.In the Device
4.Choose a setting from the When project settings don’t match a supported format, conform to
5.Select the Recompress edited frames check box to recompress any edited frames in your project before previewing. When the check box is cleared, edited frames will not be passed to the device.
6.To replace all custom functions with the default settings, click the Default All button.
Configuring an
If you have an
1.From the Options menu, choose Preferences to display the Preferences dialog.
2.Select the Preview device tab.
3.In the Device
4.If your source media does not conform to DV standards, choose a setting from the If project is invalid for DV output, conform to the following
5.Select the Recompress edited frames check box to recompress any edited frames in your project before previewing. When the check box is cleared, edited frames will not be passed to the device.
6.To replace all custom functions with the default settings, click the Default All button.
1.From the Options menu, choose Preferences to display the Preferences dialog.
2.Select the Preview device tab.
3.In the Device
4.From the Display Adapter
You can click the Identify Displays button to determine which display corresponds to each setting in the
Note: If the monitor number is displayed in red, the graphics card does not support 3D acceleration or acceleration has
been turned off. In Windows, you can go to Start > Settings >
Control Panel > Display > Settings >Advanced > Troubleshoot
to turn on acceleration if your adapter supports it.
CUSTOMIZING VEGAS SOFTWARE | CHP. 18 |