2. Preparation
2. Preparation
2-1 Attaching the Units
2-1-1 Attaching the Z-unit
1.Fix the supplied mounting plate to the work table. (Two positions)
Hexagon socket head cap screws
M4 ⋅ 10, 2 pieces
Tightening torque 15 kgfcm
2.Remove the Z-unit front cover.
(The cover to which Sony logo mark is attached.)
(Four positions)
3.Fix the Z-unit to the mounting plate. (Three positions)
Determine the fixing position using the positioning pin that is supplied with the equipment.
Hexagon socket head cap screw
| M4 ⋅ 10, 1 piece |
Hexagon socket head cap screws | |
| M4 ⋅ 18, 2 pieces |
Spring washer | SW4, 3 pieces |
Flat washer | W4, 3 pieces |
Tightening torque | 15 kgfcm |