Manual Configuration

This operation manual describes the procedures required to operate the desktop robot ROBOKIDS Various types of applications such as dispensing and soldering may be accomplished by exchanging the memory cards (RK card) which stores the programs required to run an application. The semi-programmable specification allows the user to modify an operation program and peripheral task program to perform a specific work. The full open programmable specification enables the use to freely write any program to perform an unique application. This manual contains the common contents between dispensing, soldering, semi-programmable and the full open programmable specification. For further details refer to the memory card (RK Card) operation manual (or the Full Open Programmable operation manual for the full open programmable specifications.)

Safety Instruction

Describes the safety precautions for user’s safety.

Unpacking

Describes the precautions during unpacking, and lists the supplied accessories.

1.Outline

Outlines features, names and functions of controls, and its specifications.

2.Preparation

Helps you set up the base machine. Beside the supplied accessories, you also may need to purchase the dispensing unit, soldering unit, air compressor, workpiece fixing tool (including fixing screws) depending on the configuration.

3.Maintenance

Describes daily maintenance.

4.Troubleshooting

Describes countermeasure (only the contents which are in common in applications) when an error occurs during operation. The Operation Manual of each memory card (RK card) describes countermeasures for dispensing errors and soldering errors.

5.Replacement Parts

Shows list of main replacement parts of the base machine.

6.Appendix

Described input and output specifications of each connector.

CAST-AU4/B2521E