3.Turn the base machine on.

About five seconds later, the white indicator of START button starts flashing in green.

4.Press the START button.

The machine starts returning home.

The green indicator of the START button turns on and changes to slow flashing after completing home return. (About 30 seconds later)

5.Press the START button again.

The green indicator of START button turns on and the machine starts assembling work.

POWER switch · · · ON

The START indicator lights in green.

◆Do not remove or insert a memory card while the power is turned on. The machine will not work if the memory card is removed.

◆Before turning on the machine, always insert the memory card in the memory card slot

first. The main assembly control program (the teaching pendant software only in the

NOTE semi-programmable specification) will then be loaded automatically into the unit whenever the machine is turned on.

◆This operation does not load the point programs: such design prevents the internal point programs (created as a result of a teaching) from being overwritten by mistake.

2-14

CAST-AU4/B2521E