(For a CD unit with the custom file function)
You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 16) and select the specific tracks for playback (page 17).
1 Press (MENU), then press either side of (DISC/PRST) repeatedly until ”Name Edit” appears.
2 Press (ENTER).
Name edit mode
3 Enter the characters.
1Press (+) side of (DISC/PRST) repeatedly to select the desired characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t < t . t )
If you press
If you want to put a blank space between characters, select “ ”
2Press (+) side of (SEEK/AMS) after locating the desired character.
The next character flashes.
If you press
3Repeat steps 1 and 2 to enter the entire name.
Tips
•To erase or correct a name, enter “ ” (under- bar) for each character.
•There is another way to start labeling a CD. Press and hold (LIST) for two seconds instead of steps 1 and 2. You can also complete the operation by pressing and holding (LIST) for two seconds instead of step 4.
Displaying the disc memo
Press (DSPL) during CD or CD TEXT disc playback.
Each time you press (DSPL) during CD or CD TEXT disc playback, the item changes as follows:
V
Disc number*1/Track number/
Elapsed playback time
V
Disc memo name
V
Track name*2
*1 While an optional CD unit is connected.
*2 If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.
Note
Do not use the Custom file feature while driving, or perform any other function which could divert your attention from the road.
4 To return to normal CD playback mode, press (ENTER).
15
15 | 1/20/00, 10:13 PM |